Panasonic KX-TDA30 Features Manual page 130

1.9 Automatic Route Selection (ARS) Features
Itemised Billing Code
An Itemised Billing code can be assigned for each extension and for each verification code.
If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the Itemised
Billing code assigned in the location 1 of the verification code will be used.
Conditions
WARNING
The software contained in the ARS feature to allow user access to the network must be upgraded to
recognise newly established network area codes and exchange codes as they are placed into
service.
Failure to upgrade the on-premise PBXs or peripheral equipment to recognise the new codes as
they are established will restrict the customer and users of the PBX from gaining access to the
network and to these codes.
KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.
• Dialled Number on SMDR
It is possible to choose to print either the user-dialled number or the modified number on SMDR through
system programming. (→ 1.25.1 Station Message Detail Recording (SMDR))
• ARS Data Download/Upload
It is possible to download or upload the following ARS data to the PBX using PC programming:
– 2 ARS Leading Number Exception Table
– 3 ARS Leading Number Table
– 4 ARS Routing Plan Table
This is useful when a carrier has changed the call charge, and the updated data can be used for multiple
customers.
• A TRS/Barring check is done before ARS is applied. (→ 1.8.1 Toll Restriction (TRS)/Call Barring
(Barring))
PT Programming Manual References
[320] ARS Mode
[321] ARS Leading Number
[322] ARS Routing Plan Table Number
[325] ARS Exception Number
[330] ARS Routing Plan Time Table
[331–346] ARS Routing Plan Table (1–16) (KX-TDA30/KX-TDA100/KX-TDA200 only)
[347] ARS Routing Plan Table (1–48) (KX-TDA600 only)
[350] ARS Carrier Name
[351] ARS Trunk Group for Carrier Access
[352] ARS Removed Number of Digits for Carrier Access
[353] ARS Carrier Access Code
Feature Guide References
3.1 Capacity of System Resources
130 Feature Guide
15