Panasonic KX-TDA30 Features Manual page 255

– Ring Tone Pattern Table Selection (→ 1.1.3.2 Ring Tone Pattern Selection)
– Preferred Line Assignment—Incoming (→ 1.4.1.2 Line Preference—Incoming)
– Preferred Line Assignment—Outgoing (→ 1.5.5.2 Line Preference—Outgoing)
– Hot Line Setting (→ 1.6.1.7 Hot Line)
– Transfer Recall Destination for Call Transfer and Call Park (→ 1.11.1 Call Transfer) (→ 1.12.2 Call
Park)
– Display Language (→ 1.19.4 Display Information)
– ISDN Bearer Mode (→ 1.20.1.1 Integrated Services Digital Network (ISDN)—SUMMARY)
– Flexible Button Assignment (→ 1.19.2 Flexible Buttons)
Note
To change the setting of the extension data above, the setting for the wired telephone or the PS
must be changed individually. When changing the PS setting, use the PS's original extension
number (not the main telephone's extension number), if required.
• When the Wireless XDP Parallel Mode has been set, the following extension data for the wired
telephone is copied to the PBX extension data for the PS and the extension data remains there even
when the Wireless XDP Parallel Mode is cancelled.
– Call Waiting Setting (→ 1.1.3.3 Call Waiting)
– FWD/DND Setting (→ 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
– Call Pickup Deny Setting (→ 1.4.1.3 Call Pickup)
– Executive Busy Override Deny Setting (→ 1.7.2 Executive Busy Override)
– Itemised Billing Code for ARS (→ 1.9.1 Automatic Route Selection (ARS))
– Transfer Recall Destination for Call Transfer and Call Park (→ 1.11.1 Call Transfer) (→ 1.12.2 Call
Park)
– CLIP/COLP Number and CLIP/COLP Number Selection (→ 1.20.1.2 Calling/Connected Line
Identification Presentation (CLIP/COLP))
– CLIR and COLR Setting (→ 1.20.1.2 Calling/Connected Line Identification Presentation (CLIP/
COLP))
– Extension Personal Identification Number (PIN) (→ 1.27.1 Extension Personal Identification
Number (PIN))
– COS Programming (→ 2.2.1 Class of Service (COS))
– Extension User Group (→ 2.2.2 Group)
• If Extension Feature Clear is performed, the corresponding extension data for both the wired telephone
and the PS will be cleared. (→ 1.27.2 Extension Feature Clear)
• When a call arrives, both the wired telephone and the PS ring. However, in the following cases only the
extension from which the option was set will receive ringing:
– Automatic Callback Busy (→ 1.7.1 Automatic Callback Busy (Camp-on))
– Transfer Recall (→ 1.11.1 Call Transfer), Hold Recall (→ 1.12.1 Call Hold), and Call Park Recall
(→ 1.12.2 Call Park)
PT Programming Manual References
[515] Wireless XDP Parallel Mode for Paired Telephone
Feature Guide References
1.10.9 Parallelled Telephone
2.2.1 Class of Service (COS)
1.24 Portable Station (PS) Features
Feature Guide 255