Calling Line Identification (Cli) Distribution - Panasonic KX-TDA30 Features Manual

1.1 Incoming Call Features
1.1.1.5

Calling Line Identification (CLI) Distribution

Description
Directs an incoming trunk call to a preprogrammed destination when the caller's identification number (e.g.,
Caller ID) matches the number in the System Speed Dialling Table that is used as the Caller ID Table. Each
Caller ID number (telephone number for each System Speed Dialling number) can have its own destination.
CLI Feature
Caller ID
Calling Line Identification
Presentation (CLIP)
Automatic Number Identification
(ANI)
CLI always works in conjunction with the following call distribution methods:
a)
DIL
b)
DID/DDI
c)
MSN Ringing Service
Each trunk (for DIL) and the DID/DDI/MSN number can enable or disable the CLI feature for each time mode
(day/lunch/break/night) (→ 2.2.4 Time Service).
When the call has Caller ID information and the CLI is enabled for the time mode, the call will be handled
by the CLI method.
[Programming Example of System Speed Dialling Table for CLI]
Location
(System Speed Dialling
No.)
000
001
:
→ [001] System Speed Dialling Number
*1
:
→ [002] System Speed Dialling Name
*2 :
28 Feature Guide
Caller's number is sent from an analogue trunk.
→ 1.17.1 Caller ID
Caller's number is sent from an ISDN line.
→ 1.20.1.2 Calling/Connected Line Identification Presentation (CLIP/
COLP)
Caller's number is sent from an E1 or T1 line.
→ 1.21.1 E1 Line Service
→ 1.22.1 T1 Line Service
Telephone No. *1
901234567890
:
:
Description & Reference
System Speed Dialling
*2
Name
ABC Company
:
:
CLI Destination
200
:
: