Cycle Throttle Cycle; Accel Throttle Acceleration - Ko Propo EX-2 Instruction Manual

CYCLE Throttle Cycle
Add a change to the operation of throttle brakes.
CYCLE サイクル
N
F
▶ ACCEL Throttle Acceleration
Modify the amount of acceleration burst of the throttle.
▶ ABS
Modify the amount of brake pumping.
▶ ACCEL Throttle Acceleration
Just like professional drivers who are capable of
precise throttle inputs, this function enables fine
throttle adjustments to allow quicker cornering.
【Setting Range】
WIDTH : OFF 〜 100%
（Default : OFF）
CYCLE : 1 〜 30
（Default : 15）
【Example】
By setting the throttle to feather automatically, the
car could be made to grip and corner faster on low-
grip surfaces.
[CYC] Display on the Function Monitor!
P
If [WIDTH] is not set to OFF, [CYC] will be displayed on
the initial screen's function monitor. If the key assigned
to CYCLE is pressed while at the initial screen, [CYC] will
disappear from the function monitor.
P
Setting [WIDTH] to 0 will deactivate Acceleration.
If [CYCLE] is set at a large value, the servo's operation
P
frequency will increase.
Take into account such factors as the servo used, car,
P
driving surface, etc. when adjusting all settings. Conduct
test drives to find the best setting values.
ACCEL
%
WIDTH 0FF
CYCLE １５
ABS
WIDTH
ＯＦＦ
%
CYCLE
１５
B
▶ ABS
To prevent tires from locking up during sudden braking,
brake pumping will be applied.
【Setting Range】
WIDTH : OFF 〜 100%
（Default : OFF）
CYCLE : 1 〜 30
（Default : 15）
【Example】
This function is effective when your car's wheels lock
up under braking and disturbs the car's balance. It
will help enable smooth cornering performance.
[CYC] Display on the Function Monitor!
P
If [WIDTH] is not set to OFF, [CYC] will be displayed on
the initial screen's function monitor. If the key assigned
to CYCLE is pressed while at the initial screen, [CYC] will
disappear from the function monitor.
P
Setting [WIDTH] to 0 will deactivate ABS.
If [CYCLE] is set at a large value, the servo's operation
P
frequency will increase.
P Take into account such factors as the servo used, car,
driving surface, etc. when adjusting all settings. Conduct
test drives to find the best setting values.
P For electric cars, it may be easier to understand if the
throttle channel is connected temporarily to the servo to
check ABS operation instead of to the ESC.
When "ACCEL" and "ABS" either one or both become
P
effective, "CYC" is displayed at the same position of the
initial screen.
Setting a large [CYCLE] or [WIDTH] value may increase
the servo's power consumption and also shorten its
lifespan.
49