MOON 250i Integrated Amplifier Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 3
To prevent shock hazard, all three connections must ALWAYS be used. Connect the MOON 250i only to an AC source of the proper voltage; Both the shipping box and rear panel serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void the warranty AC extension cords are NOT recommended for use with this product.
The performance of your 250i will continue to improve during the first 400 hours of listening. This is the result of a “break- in” period required for the numerous high quality electronic parts used throughout this integrated amplifier.
MOON 250i Integrated Amplifier Introduction Your MOON 250i integrated amplifier incorporates many significant design features to achieve its “world class” level of performance. This is an abbreviated list of the more important features: An oversized power supply using a custom toroidal transformer design Rated output of 50 watts/channel into 8 ohms and 100 watts/channel into 4 ohms Six line-level inputs including one front-mounted 1/8”...
The MOON 250i integrated amplifier has six (6) inputs labeled CD, DVD, Tuner, Video, Aux, and MP. Each of the first five (5) inputs has a corresponding pair of input connections located on the unit’s rear panel (refer to the section entitled “Rear Panel Connections”...
RCA inputs in the event that you wish to use your MOON 250i as a preamplifier only. The output level on the ‘PRE OUT’ is variable and is adjusted by the 250i’s volume control.
In the event that you plan to be away from your home for a few days, powering off the Integrated Amplifier may not be a bad idea. Once fully “broken-in”, please keep in mind that your 250i will require several hours of playing time before it reaches its peak performance after you’ve powered it up again.
Dimensions (W x H x D, inches) ......16.9 x 3.5 x 14.4 NOTE: In the event that you require the RS-232 codes for your MOON 250i, please contact Simaudio Ltd. directly by either email (service@simaudio.com) or by toll-free telephone (877-980-2400).