moon ACE NEO SERIES Owner's Manual page 14

Note: The "USB", "MiND" "BLUETOOTH", "PHONO" and "MP IN" inputs do not provide the facility to assign a
preset name (ie. DVD, CD, BLU-RAY, etc.) to the input label.
6. To assign a custom label to an input, rotate the volume knob until "CUSTOM" is highlighted (#8 in the LABEL option
list) then press the "OK" button. The display will show "Please enter the desired custom label:" followed by
"_________________" on the next line. Rotate the volume control clockwise to scroll through the 26 letters of the
English alphabet, first in uppercase and then lowercase, followed by the numbers 0 through 9, and finally a variety of
symbols including the space character. When you see the character you wish to use, press the "Input
select it and move to the input next character position; Repeat this step for up to a maximum of 12 characters for
your custom label. If at any time you want to change a previously entered character, simply press the "
button to go back one character at a time; This acts like the backspace character on a standard keyboard. Once you
are finished entering your custom label, press "OK" and "SAVED" will briefly appear on the display followed by the
SPDIF input options menu (refer to the display image in the previous step #3).
Note: You can press the "Setup" button to return to Setup "INPUTS" menu if you wish to edit another input.
7. Next we will adjust the volume "OFFSET" for the "BLU-RAY#3" labelled input (originally "SPDIF1"). The purpose of this
setting is as follows: it ensures that all of devices that you connect to your ACE each perform at the same volume
level. It allows you to compensate for the different output levels amongst the various devices that you will be
connecting to the ACE. Therefore, each time you switch inputs, you will not need to adjust the volume to
compensate for volume level differences between these devices.
To adjust the volume "OFFSET" for this input, rotate the volume control until "OFFSET" is highlighted on the display,
then press "OK" and "+6.0dB" will appear on the display. To increase the "OFFSET" value, rotate to the volume
control clockwise; To decrease the "OFFSET" value, rotate the volume control counter clockwise. The "OFFSET"
adjustment occurs in 0.5dB increments and the range is from –"10dB" to +"10dB". Once you have decided on an
offset value, in this case "-4.5dB", press the "OK" button:
"SAVED" will briefly appear on the display followed by returning to the "SPDIF 1" input options menu.
8. The third available option for this input is the ability to disable the input if you don't intend to use it. The advantage
of disabling inputs that you don't plan to use is as follows: When scrolling through the inputs with either the
included CRM-3 remote control or front panel input buttons, only the inputs that are set to "ENABLE" will be
available – this is more efficient. The default setting for all eleven (11) inputs is "ENABLE". To "disable the "SPDIF1"
input, rotate the volume control until the "ENABLE" option is highlighted in the "SPDIF 1" input menu. Then press
"OK" and use the volume control to alternate between "ENABLED" and "DISABLED". Then press "OK" to save this
setting and you will return to the "SPDIF 1" input options menu.
14
ACE Nēo
Series
" button to
Input"