250i Integrated Amplifier Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 3
To prevent shock hazard, all three connections must ALWAYS be used. Connect the MOON 250i only to an AC source of the proper voltage; Both the shipping box and rear panel serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void the warranty AC extension cords are NOT recommended for use with this product.
The performance of your 250i will continue to improve during the first 400 hours of listening. This is the result of a “break- in” period required for the numerous high quality electronic parts used throughout this integrated amplifier.
(USA and Canada only) Once the Nēo 250i is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to transport this product. The customized packaging is specially designed to protect the 250i from any potential damage during transit.
250i is in “Standby” mode. The Nēo 250i integrated amplifier has six (6) inputs labeled CD, Video, DVD, Aux, Tuner, and MP. Each of the first five (5) inputs has a corresponding pair of input connections located on the unit’s rear panel (refer to the section entitled “Rear Panel Connections”...
The Nēo 250i is equipped with a pair of gold-plated binding posts. Connect your speakers, with the cables of your choice, to the 250i’s speaker binding posts. Take care to respect the polarity (“+” , “-” ) of the outputs. Once again, don’t hesitate to use high quality speaker cables*.
Flick the main rocker switch, located on the rear panel, labeled “POWER” to the ‘1’ (on) position. The blue LED on the front panel will blink for up to 10 seconds while it achieves standby mode. When it stops blinking and is not illuminated, your 250i is in standby mode.
1/8” mini-jack cable. When you launch the MiND App on your smart device (iPad, iPhone, Android Device) and select this system’s ZONE, both the 180 “MiND” and the 250i will turn on. To shut down the system, press “Off” for this ZONE in the “MiND”...
Page 11
To engage the ‘CRM-2’ remote for use with the Nēo 250i Integrated Amplifier, you must first press the button labeled AMP.
Shipping Weight ............. 22 lbs / 10 Kgs Dimensions (W x H x D, inches) ......16.9 x 3.5 x 14.4 NOTE: If you require the RS-232 codes for your Nēo 250i, please contact Simaudio Ltd. directly by either email (service@simaudio.com) or by toll-free telephone (877-980-2400).
Need help?
Do you have a question about the 250i and is the answer not in the manual?
Questions and answers