moon ACE NEO SERIES Owner's Manual page 20

6. The other "BLUETOOTH" option is "DISCONNECT" which terminates the Bluetooth connection between your ACE
and your smart device (i.e. music from Bluetooth will stop playing). Press the "SETUP" button once to exit from the
"BLUETOOTH" menu and return to the main "SETUP" menu. Press the "SETUP" button again to exit from the
"SETUP" menu.
Note: You will not be required to perform the pairing process again; To reconnect via Bluetooth, you can do so
from your smart device's Bluetooth settings.
Setting an input for a MOON CD Player/Transport (MOON CD):
Your MOON Nēo ACE can automatically switch to the designated input for your SimLink
or CD transport when you press its play ► button; However, you must first assign a corresponding input – either the
"SPDIF 1", "SPDIF 2", "ANALOG 1" or "ANALOG 2" input - on the ACE as follows:
1. Enter the Setup mode by pressing the "Setup" button; Rotate the volume control until "MOON CD" is highlighted on
the display. Then press "OK".:
2. The default input for "MOON CD" is "SPDIF 1". To change this input, rotate the volume control to highlight "SPDIF 2",
"ANALOG 1" or "ANALOG 2". In this example we have chosen "ANALOG 1". Press "OK" and the check-mark
will appear to the right of "ANALOG 1" and flash briefly.
Note: Either "SPDIF 1" or "SPDIF 2" are recommended when using the digital output of a MOON CD Player/Transport;
Either "ANALOG 1" or "ANALOG 2" are recommended when using the analog output of a MOON CD Player.
3. Press the "SETUP" button once to exit from the "MOON CD" menu and return to the main "SETUP" menu. Press the
"SETUP" button again to exit from the "SETUP" menu.
Setting the volume level when powering up the ACE:
You can specify the volume level for your ACE when you power it up.
1. Enter the Setup mode by pressing the "Setup" button. Rotate the volume control until "PWR ON VOLUME" is
highlighted on the display. Then press "OK":
20
ACE Nēo
Series
TM
connected MOON CD Player
symbol