Input Settings - moon ACE NEO SERIES Owner's Manual

Owner's Manual

Input Settings:

1. To enter the Setup mode, begin by pressing the "Setup" button; "SETUP" will briefly appear on the display window:
Then rotate the volume control clockwise until "INPUTS" is highlighted on the display; then press "OK to enter the Setup
"INPUTS" menu:
2. Rotate the volume control clockwise until "SPDIF 1" is highlighted (for this example); then press "OK":
3. "LABEL" will appear highlighted on the display. Press "OK":
4. By rotating the volume control clockwise, you will scroll through a series of generic choices - DVD, CD, BLU-RAY, SAT,
TV, VIDEO, 260D – an option named "CUSTOM" which allows you to create your own text label of up to 12 characters
in length, and finally "DEFAULT" which represents the default input name, in this case "SPDIF 1":
Note: In the middle image, you will see two arrows located on the far right of the display,
bottom. These indicate that there are more options (or information) available to be displayed; use volume
control accordingly to scroll up or down to see them.
Note: The check-mark
selected option.
5. When the generic label name you wish to assign to the "SPDIF 1" input is highlighted on the display, press the "OK"
button to select it, in this example "DVD". A small check-mark
been selected:
symbol located to the right of "DEFAULT" indicates that this is the currently
will appear beside this label to confirm that it has
on top and on
13