moon ACE NEO SERIES Owner's Manual page 19

Owner's Manual
Bluetooth input:
When you want to use the ACE with a Bluetooth capable smart device (iPhone, iPad, Android, etc.), you must first pair this
smart device to the ACE by temporarily placing both items in discovery mode as follows:
1. Enter the Setup mode by pressing the "Setup" button; Rotate the volume knob until "BLUETOOTH" is highlighted
on the display. Then press "OK".
2. Rotate the volume control to highlight "START PAIRING" and then press "OK". Now the ACE will be in Bluetooth
discovery mode, and will remain so for 30 seconds; "PAIRING IN PROGRESS ..." will appear on the display window,
and the three "." will flash in sequence.
Note: The Bluetooth feature of your smart device must be enabled for pairing to work:
3. "MOON ACE" will appear in the Bluetooth device list of your smart device and you must select it. At the same time,
the ACE's display window will show "PAIRING COMPLETE" for several seconds and then return to the "BLUETOOTH"
menu, indicating successful pairing. This procedure only needs to be performed once for each smart device:
4. When the Bluetooth pairing procedure fails after 30 seconds, "PAIRING TIMEOUT" will briefly appear on the display
window, followed by returning to the "BLUETOOTH" menu:
5. To exit the discovery mode prematurely press the "SETUP" button and "PAIRING ABORTED" will briefly appear on
the display and you will automatically return to the "BLUETOOTH" menu screen.
19