moon ACE NEO SERIES Owner's Manual page 16

Network and MiND settings:
This group of SETUP options allows you to easily configure the MiND module found in the ACE.
1. Enter the Setup mode by pressing the "Setup" button; Rotate the volume knob until "NETWORK" is highlighted on
the display. Then press "OK".
2. First you can assign a custom name for how the MiND will appear in the MiND Controller App. Rotate the volume
control to highlight "MiND NAME" and then press "OK". Refer to the "To assign a custom label to an input" = the 6
item in the previous section for details about how to create a custom name for the MiND. In this example we have
assigned "MiND OFFICE" as the "MiND NAME". When you have finished creating the custom name, press "OK" and
you will be prompted to confirm this change; rotate the volume control to "Yes", press "OK" and the confirmation
message "Name Changed" will appear on the display:
Note: Step 3 to 6 are NOT required if your ACE is connected to your network using an Ethernet cable; Skip to step 7.
Step 3 to 6 are ONLY required if you want to stream music wirelessly via WiFi.
3. The next "NETWORK" option is "CONFIG". Rotate the volume control to highlight the "CONFIG" option and press
"OK". Here you will see two (2) options: "WiFi PARAMETERS" and "NET PARAMETERS". Rotate the volume control to
highlight "WiFi PARAMETERS" and press "OK".:
4. "WIFI PARAMETERS" is where you configure the ACE's MiND module to your network. There are two (2) ways to
accomplish this: Automatically using the "CONNECT" option (strongly recommended) or "MANUAL" which is
required when your network is hidden. To use the automatic "CONNECT" method, rotate the volume control to
highlight "CONNECT" and press "OK":
16
ACE Nēo
Series
th