moon ACE NEO SERIES Owner's Manual page 10

The main body of the display shows the track name
"The Natives Are Restless" on the first line and the artist
name "Horace Silver" combined with the album name
"Song For My Father" on the second line. When the
length of this information exceeds the screen size, it will
continuously scroll from left to right.
Below the track information are two (2) icons – one each
for repeat mode and random mode - that will appear
only when either or both of these modes are active.
Repeat mode has two (2) variations: repeat the current
track in the MiND QUEUE and repeat the entire contents
of the MiND QUEUE. The number "1" will appear inside
the repeat icon when repeating the current track.
Random mode will play the contents of the MiND
QUEUE in a random order, as opposed to the order they
appear in the QUEUE. Please refer to the section
"Remote Control Operation" to learn how to activate
and deactivate these modes. The repeat and random
modes are ONLY applicable to the MiND input; They are
independant of each other; they can both be active at
the same time. Finally, the volume level "40.0" appears
in bottom right.
The other digital inputs – both "OPTICAL", both "SPDIF",
"USB" and "BLUETOOTH" - will only show the input
name, sampling rate and volume level in the display
window:
10
ACE Nēo
Series
When the ACE cannot lock onto selected digital input's
signal, "NO SIGNAL" will appear in the display instead of
the sampling rate:
The Nēo ACE is capable of processing a PCM digital
signal at any of the following eight (8) sampling rates:
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz,
352.8kHz and 384kHz.
The Nēo ACE is also capable of processing a DSD digital
signal at any of the following three (3) data rates: DSD64
(2.82MHz), DSD128 (5.64MHz) and DSD256 (11.28MHz).
Notes: (i) DSD format signals can ONLY be played
through the USB input, except for DSD64 which
can also be played via the MiND module. (ii) PCM
format signals with sample-rates of 352.8kHz and
384kHz can ONLY be played through the USB
input. (iii) you cannot connect a USB flash drive or
external hard drive to the "USB" input.
Finally, the on-board MiND module is capable of
streaming PCM signals up to 24-bit/192kHz and DSD64.