moon ACE NEO SERIES Owner's Manual page 17

Owner's Manual
5. "CONNECT" will automatically ask the MiND module to search for available WiFi networks; "Searching for networks"
will appear on the display. In most cases within ten (10) seconds, but after up to sixty (60) seconds, one or more
network names will be listed on the display. Rotate the volume control to highlight your intended network and press
"OK". You will be prompted for your network key (password): Enter it the same way as you assigned a custom name
for the MiND in step 2 above and then press "OK" when you are done. "Connecting to network..." will appear on the
display; This may last up to 30-40 seconds. Then the MiND module will notify the ACE whether or not a connection
has been made; "Connection Success!" or "Connection Failure!" will appear on the display:
Note: If your network doesn't appear on the displayed list, you will need to use the "MANUAL" option.
6. If you have to perform this process manually: From the aforementioned "WiFi PARAMETERS" option, rotate the
volume control to highlight the "MANUAL" option and then press "OK". You will be prompted to enter Your SSID
(WiFi network name) – the default name is "MiND"; Enter it, "SIMOFFICE" in this example, the same way as you
assigned a custom name for the MiND in step 2 above and then press "OK" when you are done:
Select the security mode of your network by using the volume control to highlight from the four (4) available
choices, then press "OK". Finally, you will have to enter your "security key" (password): the same way as you assigned
a custom name for the MiND in step 2 above and then press "OK" when you are done:
Finally, you will be prompted to apply these above settings for the "SIMOFFICE" SSID (WiFi network name); Rotate
the volume control to "YES" and then press "OK" when you are done. "Connecting to network..." will appear on the
display; This may last up to 30-40 seconds. Then the MiND module will notify the ACE whether or not a connection
has been made; "Connection Success!" or "Connection Failure!" will appear on the display (refer to step 5 above):
Note: If you are using the "WEP" security mode, then you will need to enter a key index of either "1", "2", "3" or
"4"; rotate the volume control to highlight your selection – in this example "1"- and then press "OK":
Note: Once your "WIFI PARAMETERS" have been saved, either by using the "CONNECT" or "MANUAL" option, the
MiND will be unavailable for between thirty (30) and sixty (60) seconds while it reconfigures itself.
17