Conformity; Disposal; Shark 2 Displays; Error Codes - Vermeiren Squod SU Instruction Manual

E

CONFORMITY

The SQUOD SU electric wheelchair complies with the requirements of the European directive:
- 93/42/EEC (Medical Products Directive)
and the product norms:
- EN 12182: 1999
- (DIN) EN 12184: 1999

DISPOSAL

The manufacturer is responsible for taking back and recycling the electric wheelchair and shall
meet the requirements of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment. You can find out from your local waste disposal company where you can take the
electrical wheelchair to be recycled free of charge. It may not be disposed of with domestic
waste.
Your dealer will also be able to advise you should you have any queries.

SHARK 2 DISPLAYS

Display Unit
Progre
ss
indicat
or
Progress
indicator
charge
level

ERROR CODES

Symbol flickering fast at intervals. The number of flashes per interval provides the information below
(the following actions and checks should only be carried out by authorised individuals).
Problem/Fault
Number
0 There is no indication of
the charge level of the
batteries after the steering
unit is switched on.
1 Operating error
2 Battery error
Description Meaning
All LEDs dark. System off.
All LEDs are lit. System on.
Left red LED Low battery level.
flickering.
Progress indicator Shark system blocked.
from
"right to left" /
"green to red"
Progress indicator from Shark is being
"left to right" / programmed, is connected
"red to green" to the charger and/or is
with subsequent busy charging.
charge level display.
All LEDs flickering After starting the system,
slowly. the joystick is not in the
neutral position.
Checks
1. Check whether the battery plug is inserted fully and correctly
connected to the socket of the steering unit.
2. Check whether the two batteries are connected correctly.
3. Check whether the batteries are charged.
4. Check whether the fuses of the steering unit and the batteries are
defective or have burnt out.
1. Possible safety shut down or operating error (joystick)
2. Put the joystick in neutral position and restart the system.
1. Check batteries and cabling; if necessary charge.
2. If necessary, replace batteries.
24
SQUOD_SU
06/2009
Remarks
LEDs show the charge
level.
Charge battery
immediately.
To unlock, press the horn
button twice within 10
seconds after switching the
steering unit on.
The flickering LEDs
indicate the present
loading status.
Put the joystick in the
neutral position (let it go).