Configuring Telephone Options; Time Offset - Nortel 1120E User Manual

Configuring Telephone Options

Configuring Telephone Options

Time offset

When your Nortel IP Phone 1120E is located in a different time zone from
your system, the display shows the system time, not the local time. The
Time Offset feature allows you to adjust the time that appears on the
display.
Before you adjust the time, calculate the time difference, in hours,
between the server time and local time. To change the time that appears
on your telephone display to local time:
Feature
• Press the
• Use the telephone dialpad (
CHANGE
• Press the
• Press * on the telephone dialpad to switch between adding or
subtracting time.
• Use the telephone dialpad (
local time and system time.
Note: Press # to enter half hour increments.
OK
• Press the
The change can take up to 1 minute to appear on the display.
Services
The menu lists the following submenus:
Telephone Options
• The
administrator to configure telephone preferences.
Password Admin
•
change the Station Control Password (SCPW).
Virtual Office Login
• The
menus are listed when an IP Phone 1120E Class of Service is
configured for Virtual Office and Branch Office. For more information,
see page 119.
32
soft key.
d
) to enter *510.
soft key.
d
) to enter the number of hours between
soft key.
menu enables you or your system
menu enables you or your system administrator to
Test Local Mode
and (for Branch Office)