Field Service Ver. 1.1 Jun. 2010
13. PROCESS CAUTION INFROMATION
13.1 Display procedure
• The machine's CPU performs a self-diagnostics function that, on detecting a malfunction,
gives the process caution information in the report that is output by [Service
Mode] [Print Menu] [Mgmt. List].
See P.153
• When receiving the process caution information, user can continue printing. However, as
the information indicates that some error has occurred in the image stabilization process,
the error must be addressed rapidly.
13.2 List
• If an image stabilization fault occurs, the process caution information is provided.
Temperature/ humidity sensor
failure
IDC Sensor failure
Color Shift Test Pattern failure • The number of points detected in the main scan direction is more or
Color Shift Adjust failure
13.3 Solution
13.3.1
Temperature/ humidity sensor failure
Temperature/ humidity sensor (TEM/HUMS)
Step
1
Check the connector between TEM/HUMS-PRCB PJ27 for proper connection and correct as
necessary.
2
Change TEM/HUMS.
3
Change PRCB.
13. PROCESS CAUTION INFROMATION
Item
• No response is provided from the temperature/ humidity sensor.
• IDC sensor output values are out of the specified range.
less than the specified value during main scan direction registration
correction.
• The number of points detected in the sub scan direction is more or
less than the specified value during sub scan direction registration
correction.
• The color shift amount is greater than the specified range during
main scan direction registration correction.
• The color shift amount is greater than the specified range during sub
scan direction registration correction.
• The skew correction amount is greater than the specified value.
Relevant parts
Printer control board (PRCB)
Action
201