Manual Feeder Cleaning - Canon iR2025 Reference Manual

Manual Feeder Cleaning

If your originals have black streaks or appear dirty after scanning them through the feeder, this
may be caused by pencil writing rubbing off the originals and onto the roller. Perform this feeder
cleaning procedures to clean the feeder scanning area, film, and rollers.
WARNING
When cleaning the machine, first turn OFF the main power switch, and disconnect the power
cord. Failure to observe these steps may result in a fire or electrical shock.
CAUTION
Do not dampen the cloth too much, as this may damage the original or break the machine.
IMPORTANT
• If the feeder scanning area is dirty, it may result in a paper jam or blemished print output.
• Spin the rollers while cleaning them.
NOTE
This procedure is necessary only if the feeder (DADF-P2) is attached.
1
Open the feeder cover.
7-37
Routine Cleaning
7