Default Display After Auto Clear - Canon iR2025 Reference Manual

Default Display after Auto Clear

You can specify either the Initial Function or the Selected Function to be displayed on the
screen after the Auto Clear mode initiates.
NOTE
• The time necessary for Auto Clear to initiate can be set. (See "Auto Clear Time," on p. 4-67.)
• The default setting is 'Initial Function'.
1
4
4-18
Specifying Common Settings
(Additional Functions) ➞ [Common Settings] ➞ [Auto Clear
Press
Setting].
NOTE
If the desired setting is not displayed, press [
▼ ▲
] or [ ] to scroll to the desired setting.