Canon iR2025 Reference Manual page 49

1
1-18
Main Power and Control Panel Power
IMPORTANT
• If you turn OFF the main power, wait at least 10 seconds before turning the main power back ON.
• Do not turn the main power OFF if the optional Color Send Kit (standard for the iR2022i/iR2018i)
is activated, or the optional Super G3 FAX Board is installed, and you want to be able to send or
receive I-fax/fax documents. Sending or receiving I-fax/fax documents cannot be done when the
power is turned OFF.
• If User ID Management is set to 'On', the machine will take longer to become ready to scan.
NOTE
• Once the message <Ready to copy.> appears on the touch panel display, you can specify
settings. Copying or printing begins automatically, as soon as the machine finishes warming up.
(See Chapter 1, "Introduction to Copying," in the Copying Guide.)
• In the case above, the default settings are selected.
• The default copy settings are:
- Copy Ratio: 1:1 (100%)
- Paper Selection: Auto Paper Selection
- Copy Exposure: Automatic Exposure Adjustment
- Copy Quantity: 1
- Original Type: Text
- Copy Function:
1 1-sided copy
• The default settings for each function (Copy or Send/Fax) of the machine are already set at the
factory, but you can change them to suit your needs. (See Chapter 4, "Customizing Settings," in
the Copying Guide and Chapter 8, "Customizing Communications Settings," in the Sending and
Facsimile Guide.)
• You can select which functions to display on the Basic Features screen when turning the main
power ON, according to the Additional Functions settings. (See "Initial Function at Power ON," on
p. 4-15.)