Restricting the Send Function
This section explains how to set a password for the Address Book, restrict the use of new
addresses, set permissions for sending faxes from the fax driver, restrict recalling and
broadcasting, and confirm entered fax numbers.
NOTE
The modes described in this section are available only if the optional Color Send Kit (standard for the
iR2022i/iR2018i) is activated or the optional Super G3 FAX Board is installed.
Setting a Password for the Address Book
If you set a password, the screen for entering the password appears when you attempt to edit
the Address Book.
NOTE
6
No password is set by default.
1
2
6-38
Restricting the Send Function
(Additional Functions) ➞ [System Settings].
Press
If necessary, see the screen shot in step 1 of "Specifying the System Manager Settings," on
p. 6-2.
If the System Manager ID and System Password have been set, enter the System Manager ID
and System Password using
Press [▼] or [▲] until [Restrict the Send Function] appears ➞ press
[Restrict the Send Function].
(numeric keys) ➞ press
-
(Log In/Out).