Finisher-U2; Parts And Their Functions - Canon iR2025 Reference Manual

Finisher-U2

The Finisher-U2 is equipped with the following finishing modes: Collate, Group, Offset, and
Staple. (See "Finishing Modes," on p. 3-13.)
If the optional Additional Finisher Tray-C1 is attached to the Finisher-U2, prints can be delivered
to two different locations.
IMPORTANT
3
The Finisher-U2 cannot be attached with the optional Inner 2 Way Tray-E2.

Parts and Their Functions

a Front Cover of the Finisher
Open this cover to replace the staple cartridge in the
stapler unit, or to clear a staple jam. For instructions on
replacing the staple cartridge, see "Replacing the Staple
Cartridge," on p. 7-17. For instructions on clearing a staple
jam, see "Clearing Staple Jams," on p. 8-41.
3-12

Finisher-U2

b Additional Finisher Tray-C1
The Additional Finisher Tray-C1 can be attached to the
optional Finisher-U2, and provides an additional paper
output tray.
c Auxiliary Tray
If you are printing on large size paper, such as A3, pull out
the auxiliary tray.
d Output Tray
Paper is output to this tray.