Feeder Smudge Adjustment - Canon iR2025 Reference Manual

Feeder Smudge Adjustment

If the feeder is dirty, dots or lines may appear on copies or prints. The Auto Adjustment for Dirty
Feeder mode prevents dirt and grime in the feeder from appearing on your prints and copies.
IMPORTANT
If either [JPEG] or [PDF (Compact)] is selected for [File Format] when the Send function is used, the
setting for this mode is not applied.
NOTE
• This mode is available only if the feeder (DADF-P2) is attached to the machine.
• While some dots or lines may continue to be printed even if the Auto Adjustment for Dirty Feeder mode
is set to 'On', copies are significantly clearer than when this mode is set to 'Off'.
• The default setting is 'On'.
4
1
2
4-84
Cleaning and Adjusting the Machine
(Additional Functions) ➞ [Adjustment/Cleaning].
Press
If necessary, see the screen shot in step 1 of "Improving Print Quality and Density (Special
Mode M)," on p. 4-70.
Press [▼] or [▲] until [Auto Adjustment for Dirty Feeder] appears ➞
press [Auto Adjustment for Dirty Feeder].