# 701
Cause
The specified Department ID does not exist, or the password has changed.
Remedy
Enter the correct Department ID or password using
panel, and try again. (See "Entering the Department ID and Password," on p. 2-25.)
# 749
Cause
You could not execute the job because a service call message is being displayed.
Remedy
Turn the main power OFF, wait for 10 seconds, and turn the main power back ON. If the
machine still does not work normally, turn the main power OFF, disconnect the machine, and
contact your local authorized Canon dealer.
# 816
Cause
You cannot print because the set page limit total has been reached.
Remedy
Contact your System Manager.
# 852
Cause
An error occurred because the main power switch was turned OFF while a job was being
processed.
Remedy
Check to see if the main power switch is turned ON. Try processing the job again, if
necessary.
-
(numeric keys) on the control
List of Error Messages
8
8-49