Feeder (Dadf-P2); Parts And Their Functions - Canon iR2025 Reference Manual

Feeder (DADF-P2)

Originals placed in the feeder are automatically fed sheet by sheet to the scanning area. The
feeder also automatically turns over two-sided originals to make one- or two-sided copies.
CAUTION
• Do not insert your finger into the gaps around the original supply tray, as your fingers may
get caught. Also, be careful not to drop objects, such as paper clips into the gaps, as doing
3
so may cause damage to the machine or cause it to break down.
• When using the platen glass to copy or scan thick originals, such as books or magazines, do
not press down hard on the feeder.
• If the original output area is blocked, originals may get damaged, and printing may not be
performed correctly. Therefore, do not place any objects in the original output area.
NOTE
The feeder (DADF-P2) is standard for the iR2022i/iR2018i.

Parts and Their Functions

a Feeder Cover
Open this cover to remove jammed originals.
b Slide Guides
Adjust the slide guide to match the width of the original.
3-10

Feeder (DADF-P2)

a b
c Original Supply Tray
d Original Output Area
c
d
Originals placed here are automatically fed sheet by sheet
to the scanning area of the platen glass. Place originals into
this tray with the surface that you want to scan face up.
Originals that have been scanned from the original supply
tray are output to the original output area in the order that
they are fed into the feeder.