Default Display after Auto Clear
You can set whether the screen specified as the Initial Function is displayed after
the Auto Clear mode initiates.
NOTE
•
Auto Clear Setting is displayed only if the optional UFR II Printer Kit is installed.
•
The time necessary for Auto Clear to initiate can be set. (See "Auto Clear Time," on p.
4-68.)
•
The default setting is 'Initial Function'.
1
4
4-20
Specifying Common Settings
(Additional Functions) ➞ [Common Settings] ➞ [Auto
Press
Clear Setting].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.