Default Display After Auto Clear - Canon IMAGERUNNER 2016 Reference Manual

Default Display after Auto Clear

You can set whether the screen specified as the Initial Function is displayed after
the Auto Clear mode initiates.
NOTE
•
The time necessary for Auto Clear to initiate can be set. (See "Auto Clear Time," on p.
5-42.)
•
The default setting is 'INITIAL FUNCTION'.
1
Press [Additional Functions] ➞ [
Additional
Functions
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
OK
The <COMMON SETTINGS> menu appears.
2
Press [
press [OK].
COMMON SETTINGS
OK
2.AUTO CLEAR SET.
The <AUTO CLEAR SET.> menu appears.
] until <AUTO CLEAR SET.> appears ➞
] or [
] or [ ] until
AUTO CLEAR SET.
INITIAL FUNCTION
Specifying Common Settings
5
5-17