NETGEAR FVS318N Reference Manual page 97

Table 22. Add Profile screen settings (continued)
Field
Encryption Key
(Key1–Key4)
4. Click Apply to save your settings. The new profile is added to the List of Profiles table.
WARNING!
If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply.
Reconfigure your wireless computer to match the new settings, or
access the wireless VPN firewall from a wired computer to make
further changes.
Note: For information about how to configure WPS, see
Protected Setup

To edit a security profile:
1. On the Profiles screen (see
column for the security profile that you want to modify. The Edit Profiles screen displays.
This screen is identical to the Add Profiles screen.
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.
Note: If WPS is enabled for the security profile, first disable WPS before
you edit the security profile.

To delete one or more security profiles:
1. On the Profiles screen (see
each security profile that you want to delete, or click the Select All table button to select
all security profiles. (You cannot select the default security profile.)
2. Click the Delete table button.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Specify the active key by selecting one of the four radio buttons. Only one key
can be the active key. Either enter a key manually or generate the key
automatically by clicking Generate. The length of the key depends on the
selected encryption:
• 64-bit WEP. A key length of 5 ASCII or 10 hexadecimal characters.
• 128-bit WEP. A key length of 13 ASCII or 26 hexadecimal characters.
Note: Wireless stations need to use the key to access the wireless VPN
firewall.
on page 102.
Figure 46
Figure 46
Wireless Configuration and Security
Configure Wi-Fi
on page 93), click the Edit button in the Action
on page 93), select the check box to the left of
97