NETGEAR FVS318N Reference Manual page 174

4. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
Configure the Global Parameters

To specify the global parameters:
1. Click Global Parameters in the left column
Global Parameters pane displays in the
Figure 101.
2. Specify the default lifetimes in seconds:
• Authentication (IKE), Default. The default lifetime value is 3600 seconds. Change
this setting to 28800 seconds to match the configuration of the wireless VPN firewall.
• Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this
setting to 3600 seconds to match the configuration of the wireless VPN firewall.
3. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
The wireless VPN firewall configuration is now complete.
Virtual Private Networking Using IPv4 IPSec and L2TP Connections
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
of the Configuration Panel screen.
Configuration Panel screen.
174
The