Configure The Basic Radio Settings - NETGEAR FVS318N Reference Manual

• The time it takes to establish a wireless connection can vary depending on both your
security settings and placement. WEP connections can take slightly longer to establish.
Also, WEP encryption can consume more battery power on a notebook computer.

Configure the Basic Radio Settings

The radio settings apply to all virtual access points on the wireless VPN firewall. The default
wireless mode is 802.11ng. You can change the wireless mode, country, and many other
radio settings on the Radio Settings screen (described in this section) and on the Advanced
Wireless screen (see
settings should work well for most configurations.
Note: To configure radio settings, you first need to disable the access
points.

To configure the basic radio settings:
1. Select Network Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays:
Figure 44.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure Advanced Radio Settings
Wireless Configuration and Security
on page 104). The default radio
86