NETGEAR FVS318N Reference Manual page 224

users or business partners are permitted to access only a few resources, the page that you
create presents only the resources that are relevant to these users.
You apply portal layouts by selecting one from the available portal layouts in the configuration
of a domain. When you have completed your portal layout, you can apply the portal layout to
one or more authentication domains (see
make the new portal the default portal for the SSL VPN gateway by selecting the default radio
button adjacent to the portal layout name.
Note: The Wireless VPN Firewall's default portal address is
https://<IP_Address>/portal/SSL-VPN. The default domain
geardomain is assigned to the default SSL-VPN portal.
You can define individual layouts for the SSL VPN portal. The layout configuration includes
the menu layout, theme, portal pages to display, and web cache control options. The default
portal layout is the SSL-VPN portal. You can add additional portal layouts. You can also make
any portal the default portal for the wireless VPN firewall by clicking the Default button in the
Action column of the List of Layouts table, to the right of the desired portal layout.

To create a new SSL VPN portal layout:
1. Select VPN > SSL VPN > Portal Layouts. The Portal Layouts screen displays. (The
following figure shows an additional layout in the List of Layouts table as an example.)
Figure 132.
The List of Layouts table displays the following fields:
• Layout Name. The descriptive name of the portal.
• Description. The banner message that is displayed at the top of the portal (see
Figure 140
• Use Count. The number of remote users that are currently using the portal.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
on page 241).
Virtual Private Networking Using IPv4 SSL Connections
Configure Domains on page 247). You can also
224