View The Active L2Tp Users - NETGEAR FVS318N Reference Manual

You need to enable the L2TP server on the wireless VPN firewall, specify an L2TP server
address pool, and create L2TP user accounts. For information about how to create L2TP
user accounts, see

To enable the L2TP server and configure the L2TP server pool:
1. Select VPN > L2TP Server. The L2TP Server screen displays.
Figure 130.
2. To enable the L2TP server, select the Enable check box.
3. Specify the L2TP server address pool with a maximum of 24 IP addresses:
• In the Starting IP Address fields, type the first address of the pool.
• In the Ending IP Address fields, type the last address of the pool.
4. Click Apply to save your settings.

View the Active L2TP Users

To view the active L2TP tunnel users, select VPN > Connection Status > L2TP Active
Users. The L2TP Active Users screen displays:
Figure 131.
Virtual Private Networking Using IPv4 IPSec and L2TP Connections
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure User Accounts on page 254.
219