NETGEAR FVS318N Reference Manual page 39

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 20.
2. Click the Add table button under the List of Available ISATAP Tunnels table. The Add
ISATAP Tunnel screen displays:
Figure 21.
3. Specify the tunnel settings as explained in the following table.
Table 7. Add ISATAP Tunnel screen settings
Setting
ISATAP Subnet Prefix
Local End Point
Address
IPv4 Address
4. Click Apply to save your changes.
Description
The IPv6 prefix for the tunnel.
From the drop-down list, select the type of local address:
• LAN. The local end point address is the address of the default VLAN.
• Other IP. The local end point address is another LAN IP address that you need
to specify in the IPv4 Address fields.
If you selects Other IP from the Local End Point Address drop-down list, enter the
IPv4 address.
Internet and Broadband Settings
39