Assign And Manage Vlan Profiles - NETGEAR FVS318N Reference Manual

This is a typical scenario for a configuration with an IP phone that has two Ethernet ports, one
of which is connected to the wireless VPN firewall, the other one to another device:
Packets coming from the IP phone to the wireless VPN firewall LAN port are tagged. Packets
passing through the IP phone from the connected device to the wireless VPN firewall LAN
port are untagged. When you assign the wireless VPN firewall LAN port to a VLAN, packets
entering and leaving the port are tagged with the VLAN ID. However, untagged packets
entering the wireless VPN firewall LAN port are forwarded to the default VLAN with PVID 1;
packets that leave the LAN port with the same default PVID 1 are untagged.
Note: The configuration of the DHCP options for the default VLAN are
explained in
information about how to add and edit a VLAN profile, including its
DHCP options, see

Assign and Manage VLAN Profiles


To assign VLAN profiles to the LAN ports and manage VLAN profiles:
1. Select Network Configuration > LAN Settings. The LAN submenu tabs display, with
the LAN Setup (IPv4) screen in view. (The following figure contains some VLAN profiles
as an example.)
Figure 26.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure the IPv4 Internet Connection
Configure a VLAN Profile
LAN Configuration
on page 24. For
on page 51.
48