NETGEAR FVS318N Reference Manual page 20


To connect and log in to the wireless VPN firewall:
1. Start any of the qualified web browsers.
2. In the address field, enter https://192.168.1.1. The NETGEAR Configuration Manager Login
screen displays in the browser.
Note: The wireless VPN firewall factory default IP address is 192.168.1.1.
If you change the IP address, you need to use the IP address that
you assigned to the wireless VPN firewall to log in to the wireless
VPN firewall.
Figure 4.
3. In the User Name field, type admin. Use lowercase letters.
4. In the Password / Passcode field, type password. Here, too, use lowercase letters.
Note: The wireless VPN firewall user name and password are not the
same as any user name or password you might use to log in to your
Internet connection.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Internet and Broadband Settings
20