NETGEAR FVS318N Reference Manual page 231

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 135.
2. Complete the settings as explained in the following table:
Table 59. SSL VPN Client screen settings
Setting
Client IP Address Range
Enable Full Tunnel Support
DNS Suffix
Primary DNS Server
Secondary DNS Server
Virtual Private Networking Using IPv4 SSL Connections
Description
Select this check box to enable full-tunnel support. If you leave this check
box cleared (which is the default setting), full-tunnel support is disabled but
split-tunnel support is enabled, and you need to add client routes (see
Routes for VPN Tunnel Clients
Note: When full-tunnel support is enabled, client routes are not operable.
A DNS suffix to be appended to incomplete DNS search strings. This setting
is optional.
The IP address of the primary DNS server that is assigned to the VPN tunnel
clients. This setting is optional.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This setting is optional.
231
on page 232).
Add