NETGEAR FVS318N Reference Manual page 29

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 3. PPTP and PPPoE settings (continued)
Setting Description
Austria (PPTP) My IP Address
(continued)
Server IP
Address
Other (PPPoE) If you have installed login software, then your connection type is PPPoE. Select this radio
button, and enter the following settings:
Account Name
Domain Name
Idle Timeout
Connection
Reset
6. In the Internet (IP) Address section of the screen (see the following figure), configure the IP
address settings as explained in the following table. Click the Current IP Address link to
see the currently assigned IP address.
The IP address assigned by the ISP to make the connection with the
ISP server.
The IP address of the PPTP server.
The valid account name for the PPPoE connection.
The name of your ISP's domain or your domain name if your ISP has
assigned one. You can leave this field blank.
Select the Keep Connected radio button to keep the connection always
on. To log out after the connection is idle for a period of time, select the
Idle Timeout radio button and, in the time-out field, enter the number of
minutes to wait before disconnecting. This is useful if your ISP charges
you based on the period that you have logged in.
Select the Connection Reset check box to specify a time when the
PPPoE WAN connection is reset, that is, the connection is disconnected
momentarily and then reestablished. Then, specify the disconnect time
and delay.
Disconnect Specify the hour and minutes when the connection should
Time be disconnected.
Delay Specify the period in seconds after which the connection
should be reestablished.
Internet and Broadband Settings
29