NETGEAR FVS318N Reference Manual page 312

Table 79. Connection Status screen information for an IPv4 connection (continued)
Item
Connection Status
IP Address
Subnet Mask
Gateway
DNS Server
DHCP Server
Lease Obtained
Lease Duration
Depending on the type of connections, any of the following buttons might display on the
Connection Status screen:
• Renew. Click to renew the DHCP lease.
• Release. Click to disconnect the DHCP connection.
• Disconnect. Click to disconnect the static IP connection.
IPv6 WAN Port Status

To view the IPv6 status of the WAN port:
1. Select Network Configuration > WAN Settings > Broadband ISP Settings (IPv6).
The Broadband ISP Settings (IPv6) screen displays (see
2. Click the Broadband Status (IPv6) option arrow in the upper right of the screen to display
the Connection Status pop-up screen. (The following figure shows a dynamic IP address
configuration.)
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
The connection status can be either Connected or Disconnected.
The addresses that were automatically detected or that you configured on the
Broadband ISP Settings (IPv4) screen.
Note: For more information, see
and Configure an IPv4 Internet Connection
IPv4 Internet Connection
DHCP only. The DHCP server that was automatically detected. This field displays
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You have configured these ISP settings on the Broadband ISP
Settings screen.
Note: For more information, see
and Configure an IPv4 Internet Connection
IPv4 Internet Connection
DHCP only. The time when the DHCP lease was obtained.
DHCP only. The period that the DHCP lease remains in effect.
Monitor System Access and Performance
Let the Wireless VPN Firewall Automatically Detect
on page 25 and
on page 27.
Let the Wireless VPN Firewall Automatically Detect
on page 25 and
on page 27.
Figure 15
312
Manually Configure an
Manually Configure an
on page 33).