NETGEAR FVS318N Reference Manual page 71

Figure 37.
2. Enter the settings as explained in the following table:
Table 15. Add Advertisement Prefix screen settings
Setting
IPv6 Prefix Type
SLA ID
IPv6 Prefix
IPv6 Prefix Length Enter the IPv6 prefix length (typically /10) that should be included in the advertisement.
Prefix Lifetime
3. Click Apply to save your changes and add the new IPv6 address pool to the List of
Prefixes to Advertise table on the RADVD screen.

To edit an advertisement prefix:
1. On the RADVD screen (see
column for the advertisement prefix that you want to modify. The Add Advertisement
Prefix screen displays.
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Specify the IPv6 prefix type making a selection from the drop-down list:
• 6to4. The prefix is for a 6to4 address. You need to complete the SLA ID field and
Prefix Lifetime field. The other fields are masked out.
• Global/Local/ISATAP. The prefix is for a global, local, or ISATAP address. This
needs to be a global prefix, not the site-local or link-local prefix. You need to
complete the IPv6 Prefix field, IPv6 Prefix Length field, and Prefix Lifetime field. The
SLA ID field is masked out.
Enter the Site Level Aggregation Identifier (SLA ID) for the 6to4 address prefix that
should be included in the advertisement.
Enter the IPv6 prefix for the wireless VPN firewall's LAN that should be included in the
advertisement.
The prefix lifetime specifies how long the IP address that was created as a result of the
router advertisement should remain valid.
Enter the prefix lifetime in seconds that should be included in the advertisement. The
minimum period is 0 seconds; the maximum period is 65535 seconds.
Figure 36
LAN Configuration
on page 69), click the Edit button in the Action
71