USER MANUAL
Peplink Balance Series
10.1 LAN Configuration with VLAN
To enable VLAN configuration, click the
To add a new LAN, click the New LAN button. To change LAN settings, click the name
of the LAN to change under the LAN heading.
The following settings are displayed:
IP Address
Enter the Peplink Balance's IP address and subnet mask values to be used on the LAN.
Name
Enter a name for the LAN.
VLAN ID
Enter a VLAN ID for your LAN
Inter-VLAN
Check this box to enable routing between virtual LANs.
routing
Captive Portal
Check this box to turn on captive portals.
http://www.peplink.com
button in the IP Settings section.
IP Settings
Network Settings
-86 / 261 -
Copyright © 2015 Peplink