Dns Over Https (Doh); Peplink Intouch; Synergy Mode; Virtual Wan On Vlan - peplink PEPWAVE Balance One User Manual

For more information, please visit peplink.com

Table of Contents

4.14

DNS over HTTPS (DoH)

DoH provides the benefits of communicating DNS information over a secure HTTPS connection

in an encrypted manner. The protocol offers increased privacy and confidentiality by preventing

data interception and man-in-the-middle attacks.

4.15

InTouch is Peplink's zero-touch remote network management solution, leveraging InControl 2

and a SpeedFusion Connect (formerly known as SpeedFusion Cloud) data plan. This service

extends a network administrator's ability to reach any device UI backed by a Peplink/Pepwave

router. To configure InTouch, all you need is a valid InControl 2 subscription, a SpeedFusion

Connect data plan, and a Peplink/Pepwave router (which requires the latest 8.2.0 firmware).

To watch a demonstration and read the FAQ, visit

https://www.peplink.com/enterprise-solutions/intouch/

Or learn to configure InTouch at

4.16

Synergy mode is a cascade multiple devices and combine the number of WANs to a single

device virtually. All the WANs on the Synergized Device will appear as native WAN interfaces at

the Synergy Controller and it can be managed like the built-in WAN interfaces.

https://forum.peplink.com/t/synergy-mode-(firmware-8.3.0)/639be7d8af8c71a6f3050323/

4.17

The Virtual WAN Activation License allows you to create 1 x virtual WAN on a particular VLAN,

on either WAN or LAN interface. This means that you can create a virtual WAN on VLAN for a

WAN port, or a virtual WAN on VLAN for a LAN port.

https://forum.peplink.com/t/b20x-virtual-wan-activation-license-faq/6204bac7d90b9e6355e96e8

d/1

https://www.peplink.com

https://youtu.be/zg0iavHGkJw

Table of Contents

Show Quick Links

Table of Contents