Operator Settings - peplink balance ONE User Manual

USER MANUAL
Peplink Balance Series
This setting applies to 3G/LTE/EDGE/GPRS modems only. It does not apply to
EVDO/EVDO Rev. A modems.
Operator Settings allows you to configure the APN settings of your connection. If Auto

Operator Settings

is selected, the Peplink Balance will automatically detect the APN, configure the modem,
and make a connection. You may change the APN settings by selecting Custom Mobile
Operator Settings. The default and recommended Operator Settings value is Auto.
The correct values can be obtained from your mobile Internet service provider.
SIM PIN
This is an optional field which is only needed when there is SIM lock for your SIM card
(Optional)
service.
Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the
DNS servers to be used when a DNS lookup is routed through this connection. You can
DNS Servers
input the ISP-provided DNS server addresses into the DNS server 1 and DNS server 2
fields. If no address is entered here, this link will not be used for DNS lookups.
Please refer to Sections 0, 12.3, 12.4, and 12.5 for details about WAN Health Check,
Bandwidth Allowance Monitor, Additional Public IP Settings, and Dynamic DNS
Settings.
http://www.peplink.com -102 / 261 - Copyright © 2015 Peplink