Static Route - peplink balance ONE User Manual
Peplink balance multi-wan bonding routers
For more information, please visit peplink.com
Hide thumbs
Also See for balance ONE:
- User manual (228 pages) ,
- Manual (2 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
then enter its value. For values that are in IP address list format, you can enter one IP
address per line in the provided text area input control. Each option can be defined once
only.
This setting reserves the assignment of fixed IP addresses for a list of computers on the
LAN. The computers to be assigned fixed IP addresses on the LAN are identified by their
MAC addresses.
The fixed IP address assignment is displayed as a cross-reference list between the
computers' names, MAC addresses, and fixed IP addresses.
DHCP
Name (an optional field) allows you to specify a name to represent the device. MAC
Reservation
addresses should be in the format of 00:AA:BB:CC:DD:EE. Press
record. Press
the Client List, located at Status>Client List. For more details, please refer to Section
26.3
Next, choose port settings.
The default speed setting is Auto, which allows the Balance to detect and apply an
appropriate speed setting. You can also set the speed manually, as well as specify whether
Speed
the speed will be advertised on the network. Generally, advertising port speed is necessary
only when the port experiences difficulty negotiating speeds with peer devices.
IEEE 802.3ad
Link
Choose the interfaces that you wish to aggregate here if needed.
Aggregation
If required, enter static route and/or WINS server settings.
This table is for defining static routing rules for the LAN segment. A static route consists of
the network address, subnet mask, and gateway address. The address and subnet mask
values are in w.x.y.z format.
Static Route
The local LAN subnet and subnets behind the LAN will be advertised to the VPN. Remote
routes sent over the VPN will also be accepted. Any VPN member will be able to route to
the local subnets. Press
http://www.peplink.com
to remove a record. Reserved clients information can be imported from
.
LAN Physical Settings
Static Route Settings
to create a new route. Press
-83 / 261 -
to create a new
to remove a route.
Copyright © 2015 Peplink
Advertisement
Table of Contents
