Lan Configuration With Vlan - peplink ONE 20 User Manual
Balance multi-wan bonding routers
For more information, please visit peplink.com
Hide thumbs
Also See for ONE 20:
- User manual (258 pages) ,
- User manual (207 pages) ,
- User manual (50 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
12.1 LAN Configuration with VLAN
To enable VLAN configuration, click the
To add a new LAN, click the New LAN button. To change LAN settings, click the name
of the LAN to change under the LAN heading.
The following settings are displayed:
IP Address
Enter the Peplink Balance's IP address and subnet mask values to be used on the LAN.
Name
Enter a name for the LAN.
VLAN ID
Enter a VLAN ID for your LAN.
Inter-VLAN
Check this box to enable routing between virtual LANs.
routing
Captive Portal
Check this box to turn on captive portals.
http://www.peplink.com
button in the IP Settings section.
IP Settings
Network Settings
-87 / 269 -
Copyright © 2016 Peplink
Advertisement
Table of Contents
