Configuration - peplink balance ONE User Manual

USER MANUAL
Peplink Balance Series

Configuration

24.8
Backing up Peplink Balance settings immediately after successful completion of initial
setup is strongly recommended. The functionality to download and upload Peplink
Balance settings is found at System>Configuration.
Restore
The Restore Factory Settings button is to reset the configuration to factory default
Configuration
settings. After clicking the button, you will need to click the Apply Changes button on the
to Factory
top right corner to make the settings effective.
Settings
Download
Active
Click Download to backup the current active settings.
Configurations
To restore or change settings based on a configuration file, click Choose File to locate the
Upload
configuration file on the local computer, and then click Upload. The new settings can then
Configurations be applied by clicking the Apply Changes button on the page header, or you can cancel
the procedure by pressing discard on the main page of the web admin interface.
Upload
In a high availability (HA) configuration, the Balance unit can quickly load the configuration
Configurations
of its HA counterpart. To do so, click the Upload button. After loading the settings,
from High configure the LAN IP address of the Peplink Balance unit so that it is different from the HA
counterpart.
Availability Pair
http://www.peplink.com
Configuration
-217 / 261 - Copyright © 2015 Peplink