Firmware - peplink balance ONE User Manual

USER MANUAL
Peplink Balance Series

24.2 Firmware

The firmware of Peplink Balance is upgradeable through the web admin interface.
Firmware upgrade functionality is located at System>Firmware.
There are two ways to upgrade the unit. The first method is through an online download.
The second method is to upload a firmware file manually.
To perform an online download, click on the Check for Firmware button. The Peplink
Balance will check online for new firmware. If new firmware is available, the Peplink
Balance will automatically download the firmware. The rest of the upgrade process will
be automatically initiated.
You may also download a firmware image from the Peplink website and update the unit
manually. To update using a firmware image, click Choose File to select the firmware
file from the local computer, and then click Manual Upgrade to send the firmware to the
Peplink Balance. It will then automatically initiate the firmware upgrade process.
Please note that all Peplink devices can store two different firmware versions in two
different partitions. A firmware upgrade will always replace the inactive partition. If you
want to keep the inactive firmware, you can simply reboot your device with the inactive
firmware and then perform the firmware upgrade.
Status LED Information during firmware upgrade:

OFF – Firmware upgrade in progress (DO NOT disconnect power.)

Red – Unit is rebooting

Green – Firmware upgrade successfully completed
http://www.peplink.com
Firmware Upgrade Status
-209 / 261 - Copyright © 2015 Peplink