Network Mode - peplink balance ONE User Manual

USER MANUAL
Peplink Balance Series
WAN
Connection
This field is for defining a name to represent this WAN connection.
Name

Network Mode

Users have to specify the network they are on accordingly.
This option allows you to select the routing method to be used in routing IP frames via the
Routing Mode
WAN connection. The mode can be either NAT (network address translation) or IP
Forwarding. Click the
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the DNS
(Domain Name System) servers to be used when a DNS lookup is routed through this
connection.
Selecting Obtain DNS server address automatically results in the DNS servers assigned by
DNS Servers
the PPPoE server being used for outbound DNS lookups over the WAN connection. (The DNS
servers are obtained along with the WAN IP address assigned from the PPPoE server.)
When Use the following DNS server address(es) is selected, you can put custom DNS server
addresses for this WAN connection into the DNS Server 1 and DNS Server 2 fields.
http://www.peplink.com
WAN Connection Settings
button to enable IP forwarding.
-69 / 261 - Copyright © 2015 Peplink