Time - peplink balance ONE User Manual

USER MANUAL
Peplink Balance Series
The firmware upgrade process may not necessarily preserve the previous configuration, and the behavior varies on
a case-by-case basis. Consult the release notes for the particular firmware version before installing. Do not
disconnect the power during firmware upgrade process. Do not attempt to upload a non-firmware file or a firmware
file that is not supported by Peplink. Upgrading the Peplink Balance with an invalid firmware file will damage the unit
and may void the warranty.

24.3 Time

The time server functionality enables the system clock of the Peplink Balance to be
synchronized with a specified time server. The settings for time server configuration are
located at System>Time.
This specifies the time zone (along with the corresponding Daylight Savings Time scheme)
in which Peplink Balance operates. The Time Zone value affects the time stamps in the
Time Zone
event log of the Peplink Balance and e-mail notifications. Check Show all to show all time
zone options.
Time Server
This setting specifies the NTP network time server to be utilized by the Peplink Balance.
http://www.peplink.com
Important Note
Time Settings
-210 / 261 - Copyright © 2015 Peplink