USER MANUAL
Peplink Balance Series
22 Remote User Access
Networks routed by a Peplink Balance can be remotely accessed via L2TP with IPsec or
PPTP. To configure this feature, navigate to Network > Remote User Access
Enable
Click the checkbox to enable Remote User Access.
Determine whether remote devices can connect to the Balance using L2TP with IPsec or
VPN Type
PPTP. For greater security, we recommend you connect using L2TP with IPsec.
Enter your preshared key in the text field. Please note that remote devices will need this
Preshared Key
preshared key to access the Balance.
This setting is for specifying the WAN IP addresses where the PPTP server of the router
Listen On
should listen on.
This setting allows you to define the PPTP User Accounts. Click Add to input username and
User Accounts
password to create an account. After adding the user accounts, you can click on a
username to edit the account password. Click the button X to delete the account in its
http://www.peplink.com
Remote User Access Settings
-180 / 261 -
Copyright © 2015 Peplink