Network Mode - peplink ONE 20 User Manual
Balance multi-wan bonding routers
For more information, please visit peplink.com
Hide thumbs
Also See for ONE 20:
- User manual (258 pages) ,
- User manual (207 pages) ,
- User manual (182 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
WAN
Connection
Enter a name to represent this WAN connection.
Name
Network Mode
Choose the appropriate network mode for the cellular connection.
Select the routing method to be used in routing IP frames via the WAN connection. The mode
Routing Mode
can be either NAT (network address translation) or IP Forwarding. Click the
enable IP forwarding.
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the DNS
(Domain Name System) servers to be used when a DNS lookup is routed through this
connection.
Selecting Obtain DNS server address automatically results in the DNS servers assigned by
DNS Servers
the PPPoE server being used for outbound DNS lookups over the WAN connection. (The DNS
servers are obtained along with the WAN IP address assigned from the PPPoE server.)
When Use the following DNS server address(es) is selected, you can put custom DNS
server addresses for this WAN connection into the DNS Server 1 and DNS Server 2 fields.
http://www.peplink.com
WAN Connection Settings
-70 / 269 -
Copyright © 2016 Peplink
button to
Advertisement
Table of Contents
