Setting And Unsetting With Keytags Or Cards - Honeywell Galaxy 2 Series Installation Manual

Galaxy 2 Series Installation Manual

Setting and Unsetting with Keytags or Cards

The following information applies to systems fitted with a keyprox.
To Full Set the system (6160 keyprox):
Hold keytag or card in front of prox symbol for
three seconds. (Full setting will commence ).
NOTE: To cancel the setting during the exit
time, hold keytag briefly in front of
prox symbol.
To Unset the system (6160 keyprox):
Hold keytag briefly in front of prox symbol.
(The system unsets with a double beep).
To Full Set the system (Mk 7 keyprox):
Hold keytag or card in front of prox symbol
for three seconds. (Full setting will com-
mence as per keypad procedure).
NOTE: To cancel the setting during the exit
time, hold keytag briefly in front of
prox symbol.
To Unset the system (Mk 7 keyprox):
Hold keytag briefly in front of prox symbol.
(The system unsets with a double beep).
Setting with Keytags/Cards
ARMED
READY
1
4
7
*
45
Keytag
Keytag or card presented to
prox reader to set and/or
unset the system
A
2
3
B
5
6
9 ent
8
#
0 esc